Unboxing our Dust Collector

Nailster’s Dust Collector is a smart dust collector that absorbs nail dust and collects it in a filter. It is designed to capture dust during your nail work so it does not spread into the air or gather around you. We developed the Dust Collector with a focus on making it as quiet as possible without compromising suction power.

Our Dust Collector is cordless when the battery is charged. It charges via a power outlet. Once fully charged, it can last for over 5 hours at medium suction strength. It has highly effective suction power and can be opened for cleaning both inside and outside. The dust filter can also be replaced as needed.

When you purchase our Dust Collector, it comes with a dust brush, a dust filter, and a charging cable for the device.

The Dust Collector has four buttons. The large button works as the power on/off button, while the three smaller buttons regulate suction strength. The first button is marked with “L” (low) and provides the lowest suction strength. The next button is marked with “M” (medium) and provides medium strength. The last button is marked with “H” (high) and activates maximum suction strength.

For the best results, it is recommended to replace the filter regularly. You can purchase extra filters on our website. To replace the filter, pull the small black handle on the right side of the Dust Collector and remove the used filter, then insert a new one. Please note that changing the filter may release some dust.