Nailster Guide universe

Technician guides

Unboxing our Electric Nail File

Unboxing our Electric Nail File

Nailster’s Electric Nail File is both stylish and functional. It can be used to save time on all the steps where you would normally use a handheld nail file. The electric nail file is suitable for product removal as well as preparation (prep) of the natural nail. Our nail file has been developed with a focus on performance and comfort. It is designed to sit comfortably in your hand, which is why we have integrated a textured area on the handle. The electric nail file can run at speeds between 1,000 and 35,000 rotations per minute. Our electric nail file comes with a handpiece that connects to the machine, a holder for the handpiece, and four different bits. Mandrel Bit: This bit is used together with our Sanding Bands. A Sanding Band is placed on the Mandrel Bit and can be easily replaced when worn out. One Sanding Band (grit 180) is included when you receive your Electric Nail File. It can be used for product removal, and if you purchase new sanding bands, they can also be used for natural nail preparation. Our sanding bands can be used 3–4 times before they need replacing. Diamond Bit: This bit is used for natural nail preparation close to the cuticle. The blue ring on the bit indicates that it has medium grit. Cone-Shaped Bit: This bit is used for natural nail preparation and for removing product at the edge of the nail. It can also be used to remove dead skin cells around the nail, leaving a clean and beautiful finish. Ball-Shaped Bit: This bit is also used for natural nail preparation and can remove dead skin cells around the nail for a neat and well-groomed finish. To replace a bit in the electric nail file, turn the handpiece to the left until you hear a click. This means the mouthpiece is open, and you can now insert the desired bit. Once the bit is inserted, turn the handpiece to the right to secure it. It is important that the electric nail file is turned off when replacing a bit. On the electric nail file, you will find four touch buttons that light up on the display when the machine is on. The first button is for turning the machine on and off. The second is the rotation button. Our electric nail file can rotate in both directions, making it easy to file evenly no matter which hand you are working on. The last two buttons adjust the speed – “min” for lower and “max” for higher speed. There are a total of 35 different RPM levels.

Read more
Unboxing our Dust Collector

Unboxing our Dust Collector

Nailster’s Dust Collector is a smart dust collector that absorbs nail dust and collects it in a filter. It is designed to capture dust during your nail work so it does not spread into the air or gather around you. We developed the Dust Collector with a focus on making it as quiet as possible without compromising suction power. Our Dust Collector is cordless when the battery is charged. It charges via a power outlet. Once fully charged, it can last for over 5 hours at medium suction strength. It has highly effective suction power and can be opened for cleaning both inside and outside. The dust filter can also be replaced as needed. When you purchase our Dust Collector, it comes with a dust brush, a dust filter, and a charging cable for the device. The Dust Collector has four buttons. The large button works as the power on/off button, while the three smaller buttons regulate suction strength. The first button is marked with “L” (low) and provides the lowest suction strength. The next button is marked with “M” (medium) and provides medium strength. The last button is marked with “H” (high) and activates maximum suction strength. For the best results, it is recommended to replace the filter regularly. You can purchase extra filters on our website. To replace the filter, pull the small black handle on the right side of the Dust Collector and remove the used filter, then insert a new one. Please note that changing the filter may release some dust.

Read more